Ziggy

Disconnected Out: In:

Current Ziggy Program

Program Name

As Computer File

MIDI Setup

Loc / Suspend

XLFO

Modulation

C.Osc Waveshape

Audio Blend

Cycler

Mod Osc

Complex Osc

Gate

Active Preset

Preset Name

All Presets

Mode:

Zone:

Env:

Send Auto-query Push from knob Link slots

Sus: Hold None Timed

Limit Atk Hard Retrig

—

RTT: — · drift: — · (Query to populate)

Capture:

Output: Settings:

no captures

Snapshots: click "Waveform Snapshot" above to capture one

1. Enter Update Mode 2. Connect "DFU" 3. Select Firmware 4. Flash Firmware

puts Ziggy into Device Firmware Update mode. It will cease to work as a musical instrument in DFU mode. If you need to exit DFU mode, just cycle the power on Ziggy.

Current firmware: not connected

browser popup will show "DFU in FS mode." Click on it and press the "Connect" button.

select a firmware version to flash.

Press this button and follow progress below.

Rev2:
Step through 1–4 above, or power cycle Ziggy while holding the Waveshape button if your firmware predates v0.68d.

v0.50.0

FV-1 Program Slots

Sync to read current slot names from device. Select a program from the library below, or upload a .bin or .spn file.

SpinASM .spn files are compiled in-browser automatically.

Program Library

Upload Program

Slot

Name

Pot0 Label

No file selected

Compiler Output

Scales & Tuning

Audio input pitch detection with oscilloscope and level meter.
Note: The scope and tuner use Web Audio, which only supports stereo input (channels 1 and 2). To tune other outputs, route them to one of these channels.

Audio Input

Channel

—

Tuning:

Scale:

—

Choose a Tuning (cent grid) and a Scale (ladder) — the scope reports whether each detected pitch is on both, on the tuning grid only, or off entirely.

Tuning

Scale

Root

Example text, automatically generated, not finalized

OLED Screenshots

Capture display screenshots from Ziggy via MIDI SysEx.

Scale

Theme